NEO MAKİNA ve MÜHENDİSLİK A.Ş. supplies domestic (residential) boilers and central heating systems for housing estates, hotels, dormitories and public buildings. From gas and oil-fired condensing boilers to solid-fuel central systems, hot-water cylinders and plant-room equipment, the heating infrastructure is engineered and installed from a single source.
Product Groups
Gas and Oil-Fired Condensing Boilers
- Condensing technology: Latent heat in the flue gas is recovered for seasonal efficiency above 100% on net calorific value (up to 95% on gross).
- Modulating burner: Stepless output control in the 1:5 – 1:10 range according to heat demand; cycling losses are reduced.
- Stainless steel or aluminium-silicon heat exchanger: Resistant to condensate, long service life.
- Cascade connection: Several boilers under one controller for redundancy and part-load efficiency.
- Weather-compensated control: Programmable heating schedules, remote monitoring and BMS integration.
Solid-Fuel Central Heating Boilers
- Fuel compatibility: Coal, wood and pellets; automatic (stoker-fed) or manually fed versions.
- High combustion efficiency: Complete combustion with secondary air, low soot and smoke emissions.
- Safety equipment: Overheat thermostat, back-burn protection, thermal safety heat exchanger.
- Long burn time: Large fuel hopper for extended stable heating on a single charge.
Hot-Water Cylinders and Plant-Room Equipment
- Domestic hot-water cylinders: Single or twin coil, enamelled or stainless, highly insulated storage.
- Expansion vessels and circulation pumps: Variable-speed, high-efficiency pump sets for even heat distribution.
- Protective equipment: Magnetic dirt separators, strainers, safety valves, air separators and water-treatment units.
Typical Application Range
- Thermal capacity: 50 kW – 2,000 kW (higher in cascade)
- Applications: housing estates, apartment blocks, hotels, dormitories, schools, hospitals, commercial buildings
- Fuel: natural gas, LPG, fuel oil, coal, wood, pellets
- Standards: CE, EN 15502 (gas-fired), EN 303-5 (solid-fuel), ISO 9001
Why NEO MAKİNA?
Heat-loss calculation, boiler and cylinder sizing, plant-room layout and flue design are prepared by our engineering team. Certified materials, a wide service network and original spare parts ensure uninterrupted service over the system's life. For buildings with energy-efficiency targets, we prepare feasibility studies for converting existing plant rooms to condensing systems.
Frequently Asked Questions
How much fuel does a condensing boiler save?
Compared with a conventional boiler, 15–25% fuel savings are achieved in low-temperature regimes (e.g. 55/45 °C); the saving depends on system temperature and building insulation.
What capacity does my plant room need?
It is determined from the heat-loss calculation and hot-water demand. Floor area, number of storeys and insulation level are enough for a first estimate; final sizing is done at project stage.
Can a solid-fuel boiler be automated?
Yes. Stoker-fed boilers are fed automatically with pellets or nut coal and run for days without intervention depending on hopper size.
To select the right boiler and heating system for your building and request a quotation, contact us.